Menu

flail mowers

  • Hurricane H40

     

    Flail Mowers

    Hurricane H40

    16-40 HP (12-30 KW)

    540 rpm

     

        950 940B Quick hitch  

      H40 072Flailmower  

     

    • Cutting heights: from 1" to 5".
    • Choice of fine cut blades at 90° angles, reverse "Y" blades, paddle blades or hammer type blades.
    • Dethatching blades available.
    • High blade tip speed.
    • Precise blade overlap.
    • Adjustable cutting height roller with scraper.
    • Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 3).
    • Sealed rotor bearings.
    • Front & rear tractor mounting.
    • Electronically balanced rotor.
    • Heavy duty, one piece balanced steel pulleys.
    • Two heavy duty reinforced notched belts (SPBX).
    • Automatic belt tensioner.
    • 3 Point linkage, cat. 1.
    • Floating top link.
    • Highly engineered & rugged gearbox.
    • Offset from center: 3" on H40-048, 8.5" on H40-060, & 6.5" H40-072.
    • Rubber safety shielding.

     

    FlailMowerH40Blades

     

     

    FlailMowerH40View4  

    Choice of fine cut, detchatching, reverse "Y" blades, paddle blades and hammer type blades.

    Double belt transmission with automatic belt tensioner.

     

    Model HP Working width Overall width Weight lbs Ship lbs Rotor rpm Blades tip speed (ft/min) #of Blades Cutting height # Belts
    & type
    Driveline
    1 3/8"
    H40-048 16-40 48" 54" 418 556 2,278 8,858 48 1"-5" 2 SPBX ASAE cat. 3
    H40-060 20-40 60" 64" 456 593 2,278 8,858 64 1"-5" 2 SPBX ASAE cat. 3
    H40-072 25-40 72" 76" 528 638 2,278 8,858 76 1"-5" 2 SPBX ASAE cat. 3

    WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

    Overrunning Clutch  009-9560 Overrunning clutch for driveline
    SideSkid  009-9507 Side skids
    Hammerblade

     009-9200 Hammer type blades for model H40-048

     009-9201 Hammer type blades for model H40-060

     009-9202 Hammer type blades for model H40-072

     

  • Hurricane H40-S

     

    Flail Mowers

    Hurricane H40-S

    Side-shift flail mower

    16-40 HP (12-30 KW)

    540 rpm

     

    937 0160 Side shift        950 940B Quick hitch 
      

      FlailMowerH40 S72  

     

    • Cutting heights: from 3/4" to 2 3/8".
    • Manual or optional hydraulic side-shift up to 16".
    • Dual rear roller mounting position, inside or outside the cutting chamber.
    • Manual belt tensioner without spring loaded idlers.
    • Choice of fine cut blades at 90° angles, reverse "Y" blades, paddle blades or hammer type blades.
    • Dethatching blades available.
    • Adjustable cutting height roller with scraper or self cleaning roller when mounted inside the cutting chamber.
       
    • Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 3)
    • Sealed rotor bearings.
    • Front and rear tractor mounting.
    • Heavy duty, one piece balanced steel pulleys.
    • Two heavy duty reinforced notched belts (SPBX).
    • 3 Point linkage, cat. 1.
    • Standard front rubber safety shielding or optional front steel deflectors.

    H40 roller inside mnt

    H40 roller outside mnt

    Roller mounted inside the cutting chamber.

     Roller mounted outside the cutting chamber.


    H40S Side shift
    Manual or hydraulic side-shift up to 16".

    Model HP Working width Overall width Weight lbs Ship lbs Rotor rpm Blades tip speed (ft/min) #of Blades Cutting height # Belts
    & type
    Driveline
    1 3/8"
    H40-S48 16-40 48" 54" 552 690 2,278 8,858 48 3/4" - 2 3/8"
    2 SPBX ASAE cat. 3
    H40-S60 20-40 60" 64" 624 762 2,278 8,858 64 3/4" - 2 3/8" 2 SPBX ASAE cat. 3
    H40-S72 25-40 72" 76" 697 835 2,278 8,858 76 3/4" - 2 3/8" 2 SPBX ASAE cat. 3

    WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

    Overrunning Clutch  009-9560 Overrunning clutch for driveline
    0099206  009-9206 Side skids
    Hammerblade

     009-9200 Hammer type blades for model H40-S48

     009-9201 Hammer type blades for model H40-S60

     009-9202 Hammer type blades for model H40-S72

     0099207

     009-9207 Hydraulic cylinder for side shift

    0099208 

     009-9208 Front steel deflectors for model H40-S48

     009-9209 Front steel deflectors for model H40-S60

     009-9210 Front steel deflectors for model H40-S72

     

    adobe PDF icon Operator's & Parts Manual H40-S

     

  • Hurricane H70

    Flail Mowers

    Hurricane H70

    30-70 HP (22-52 KW)

    540 rpm

    Heavy duty      950 940B Quick hitch  

    FlailMowerH70View1

    • Cutting heights: from 3/4" to 6".
    • Choice of fine cut blades at 90° angles, reverse "Y" blades, paddle blades or hammer type blades.
    • Dethatching blades available.
    • High blade tip speed.
    • Precise blade overlap.
    • Adjustable cutting height roller with scraper.
    • Driveline with overrunning clutch (1 3/8" ASAE cat. 4).
    • Highly engineered & rugged gearbox.
    • Belt shield fender.
    • Front & rear tractor mounting.
    • Electronically balanced rotor.
    • Heavy duty, one piece balanced steel pulleys.
    • Two heavy duty reinforced notched belts (CX).
    • Manual belt tensioner.
    • 3 Point linkage, cat. 1 & 2.
    • Floating top link.
    • Forward & reverse rotor rotation; clockwise is standard.
    • Rotor supports with spherical roller bearings.
    • Rubber safety shielding.
    • Replaceable skids.

     

    FlailMowerH70Blades

    FlailMowerH70View4 FlailMowerH70View5 FlailMowerH70View2

    Choice of fine cut, detchatching, reverse  "Y" blades, paddle blades or hammer type blades.

    Replaceable skids

    Floating top link

    Rotor support

     

    FlailMowerH70View3

         
    Adjustable cutting height roller with scraper.      

     

    Model HP Working width Overall width Weight lbs Ship lbs Rotor rpm Blades tip speed (ft/min) # of Blades Cutting height # Belts
    & type
    Driveline
    1 3/8"
    H70-060 30-70 60" 71" 869 1,045 2,080 8,464 64 3/4"-6" 2 CX ASAE cat. 4 overrunning clutch
    H70-072 35-70 72" 85" 955 1,145 2,080 8,464 80 3/4"-6" 2 CX ASAE cat. 4 overrunning clutch
    H70-088 40-70 88" 99" 1078 1,298 2,080 8,464 96 3/4"-6" 2 CX ASAE cat. 4 overrunning clutch

    WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

    Guagewheel  009-9691 Guage wheels with laminated tires
    Hammerblade

     009-9201 Hammer type blades for model H70-060, additional

     009-9203 Hammer type blades for model H70-072, additional

     009-9204 Hammer type blades for model H70-088, additional

     

  • Hurricane H80

     

    Flail Mower

    Hurricane H80

    40-80 HP (30-60 KW)

    540 rpm

    Heavy duty      950 940B Quick hitch  

    H80 FlailMower
    • Cutting heights: from 3/4" to 6".
    • Side plates thickness: 5/16".
    • Rotor diameter: 6".
    • Rotor wall thickness: 5/16" (72") and 3/8" (88" & 100").
    • Choice of fine cut blades at 90° angles, reverse "Y" blades, paddle blades or hammer type blades.
    • Dethatching blades available.
    • High blade tip speed.
    • Precise blade overlap.
    • Adjustable cutting height roller with scraper.
    • Highly engineered & rugged gearbox.
    • Front & rear tractor mounting.
    • Electronically balanced rotor.
    • Heavy duty, one piece balanced steel pulleys.
    • Two heavy duty reinforced notched belts (CX).
    • 3 Point linkage, cat. 1 & 2.
    • Floating top link.
    • Forward & reverse rotor rotation; clockwise is standard.
    • Replaceable skids.
    • Manual belt tensioner
    • Rotor supports with spherical roller bearings.
    • Driveline with overrunning clutch (1 3/8" ASAE cat. 6).
    • Belt shield fender.
    • Rubber safety shielding.
    FlailMowerH70Blades H80 3Point H80 CuttingAdj H80 RotorSupport

    Choice of fine cut, detchatching, reverse  "Y" blades, paddle blades or hammer type blades.

    3 Point linkage, cat. 1 & 2

    Adjustable cutting height roller with scraper

    Rotor support

    Model HP Working width Overall width Weight lbs Ship lbs Rotor rpm Blades tip speed (ft/min) # of Blades Cutting height # Belts
    & type
    Driveline
    1 3/8"
    H80-072 40-80 72" 85" 1,153 1,303 1,873 8,268 80 3/4"-6" 2 CX ASAE cat. 6 overrunning clutch
    H80-088 45-80 88" 99" 1,296 1,446 1,873 8,268 96 3/4"-6" 2 CX ASAE cat. 6 overrunning clutch
    H80-100 50-80 100" 110" 1,486 1,636 1,873 8,268 104 3/4"-6" 2 CX ASAE cat. 6  overrunning clutch

    WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

    Guagewheel  009-9701 Guage wheels with laminated tires
    Hammerblade

     009-9203 Hammer type blades for model H80-072, additional

     009-9204 Hammer type blades for model H80-088, additional

     009-9205 Hammer type blades for model H80-0100, additional

     

Go to top