Menu

Green-Rite

Overseeder-aerator & seeded-cultivator

25-70 HP (19-52 KW)

540 rpm

    Quickhitch  

 GreenRite

  

  • Special 2.8" spacing on rotor for aerating with 3 knives per flange; 4 knives on 82".
  • 2" to 3" suggested working depth with aerator rotor, 7 1/4" working depth with tiller rotor; 8 3/4" on 82".
  • Seed covering/dethatching adjustable tickler tines.
  • High precision metering seed cups made from a nylon/fiberglass composite.
  • Parking stand.

 

  • Ground drive system for seed hopper.
  • Large capacity seed hopper with agitator.
  • Heavy duty  shielded PTO shaft with slip clutch safety (1 3/8" ASAE cat. 3 for models 250, 258 & 266, cat. 6 for model 282).
  • Corrugated depth control roller made with low weight nylon/fiberglass roller rings.
  • Double sided, extra thin profile razor blades reduce impact when aerating over exisiting turf (available on request).
Seedcalibrationhandle Standardblades Razorcutblades

Seed cups for precise metering of seed and fertilizer

Seed calibration handle

Standard blades

Razor cut blades

Model  HP  Working width Overall width Weight lbs Ship
lbs
Capacity cu. ft. #
Seed cups
#
Flanges
#
Blades
Chain sprockets Rotor rpm Maximum working depth  Driveline    1 3/8"
  Green-Rite
GRT-250 25-45 50" 57" 910 1,160 4.60 7 15 43 11-14 231 7 1/4" ASAE cat. 3 slip clutch
GRT-258 30-45 58" 66" 998 1,245 5.30 8 18 52 11-14 231 7 1/4" ASAE cat. 3 slip clutch
GRT-266 32-45 66" 74" 1,170 1,390 6.00 9 21 61 11-14 231 7 1/4" ASAE cat. 3 slip clutch

GRT-282

40-70 82" 89" 1,500 1,760 7.60 11 26 104 12-14 221 8 3/4" ASAE cat. 6 slip clutch
Guagewheelcloseup  009-9875 Gauge wheels for all models
Gaugerollercloseup

 009-9648 Front roller for GRT-250

 009-9516 Front roller for GRT-258

 009-9563 Front roller for GRT-266

 009-9566 Front roller for GRT-282

Cbladetillerrotor

 009-9649 Tiller rotor for GRT-250

 009-9517 Tiller rotor for GRT-258

 009-9564 Tiller rotor for GRT-266

 009-9567 Tiller rotor for GRT-282

SeedConveyors

 009-9139 Seed conveyors for GRT-250

 009-9140 Seed conveyors for GRT-258

 009-9141 Seed conveyors for GRT-266

 009-9142 Seed conveyors for GRT-282

CastIronRollerRing

  008-8589 Cast iron roller rings

RollerscraperGreenrite

 009-9650 Rear roller scraper for GRT-250

 009-9539 Rear roller scraper for GRT-258

 009-9565 Rear roller scraper for GRT-266

 009-9568 Rear roller scraper for GRT-282

NOTE: Units may utilize gauge wheels or a front roller for blade depth control, but not both.

Go to top