Grooming Mowers

Cyclone C30

Rear discharge three spindle grooming mower

16-30 HP (12-22 KW)

540 rpm

Highly engineered & rugged gearbox.
Front & rear tractor mounting.
4 rubber swivel tires to guarantee a perfectly level cut.
Floating 3 point linkage, cat. 1.
10 gauge reinforced mower deck.
Stamped steel reinforced wheel arms attached by 5 bolts for maintaining a consistent cutting height.
Stamped steel wheel yokes.

Cutting heights: from 1" to 4"
Spindle shafts greased from the top for easy service.
Heavy duty reinforced belt (BX).
Heavy duty, one piece, balanced steel pulleys.
Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 2).
High blade tip speed.
Precise blade overlap.


Highly engineered & rugged gearbox	Floating linkage	Front antiscalping roller	Spacers provide for quick & easy height adjustment

Model	HP	Working width	Overall width	Weight lbs	Ship lbs	Rotor rpm	Blade tip speed (ft/min)	# of blades	Cutting height	# Belts & type	Driveline 1 3/8"
Hard Tires 8.4"x3.2"
C30-RD4H	16-30	48"	51"	340	440	3,037	13,188	3	1"-4"	1 BX	ASAE cat.2
C30-RD5H	20-30	60"	62"	375	490	2,803	14,763	3	1"-4"	1 BX	ASAE cat.2
C30-RD6H	25-30	72"	74"	440	570	2,278	14,566	3	1"-4"	1 BX	ASAE cat.2
Air Tires 9"x3.5"
C30-RD4A	16-30	48"	51"	329	429	3,037	13,188	3	1"-4"	1 BX	ASAE cat.2
C30-RD5A	20-30	60"	62"	364	479	2,803	14,763	3	1"-4"	1 BX	ASAE cat.2
C30-RD6A	25-30	72"	74"	429	559	2,278	14,566	3	1"-4"	1 BX	ASAE cat.2

WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

NOTE: 1000 and 2000 RPM gearbox available upon request.