Menu

 

Cyclone C70

Heavy duty rear discharge three spindle grooming mower

30-70 HP (22-52 KW)

540 rpm

Heavy duty    950 940B Quick hitch
  
 
 CycloneC70View1

  
  • Highly engineered & rugged gearbox with cooling fins.
  • Cutting heights: from 1.3" to 5.3".
  • Front & rear tractor mounting.
  • 4 rubber swivel tires with bearings to guarantee a perfectly level cut.
  • Stamped steel reinforced wheel arm attached by 8 bolts for maintaining a consistent cutting height.
  • Floating 3 point linkage, cat. 1.
  • Front antiscalping roller standard.
  • 8 gauge reinforced mower deck.
  
  • Spindle shafts greased from the top for easy service.
  • Two heavy duty reinforced belts (CX).
  • Heavy duty, one piece, balanced steel pulleys.
  • Heavy duty shielded PTO shaft (1 3/8" ASAE cat. 4).
  • Safety chain shield standard.
  • Stamped steel wheel yokes.
  • High blade tip speed.
  • Precise blade overlap.
  • Six free swinging kick back blades.

 

CycloneC70View5

 

CycloneC70View6  

 

 CycloneC70blades

 

 CycloneC70wheelspacers

Front antiscalping roller

Highly engineered & rugged gearbox with cooling fins

Free swinging kick
back blades

Stamped wheel yoke
with large air tire

Model HP Working width Overall width Weight lbs Ship lbs Rotor rpm Blade tip speed (ft/min) # of blades Cutting height # Belts
& type		  Driveline     1 3/8"
  Hard Tires 12"x4"
C70-090H 30-70 90" 92" 1,237 1,267 1,750 14,106 6 1.3"-5.3" 2 CX ASAE cat. 4
C70-110H 40-70 110" 112" 1,390 1,420 1,562 14,998 6 1.3"-5.3" 2 CX ASAE cat. 4
  Air Tires 13"x6.5"
C70-090A 30-70 90" 92" 1,137 1,167 1,750 14,106 6

1.3"-5.3"

 2 CX ASAE cat. 4
C70-110A 40-70 110" 112" 1,290 1,320 1,562 14,998 6 1.3"-5.3" 2 CX ASAE cat. 4

WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.

 CycloneC70View5    009-9915 Standard front antiscalping roller
  CycloneC70View5   009-9815 Professional front antiscalping roller
QuickHitch  002-800 Quick hitch adapter

 

Operator's & Parts Manual for the Cyclone C70

Go to top