HURRICANE H70

Flail mowers
30-70 HP (22-52 KW)
540 rpm - Cat. 1 & 2

  • Cutting heights: from 3/4″ to 6″
  • Choice of fine cut blades at 90° angles, reverse “Y” blades, paddle blades or hammer type blades
  • Dethatching blades available
  • Adjustable cutting height roller with scraper
  • Driveline with overrunning clutch (1 3/8″ ASAE cat. 4)
  • Highly engineered & rugged gearbox
  • Belt shield fender
  • Front & rear tractor mounting
  • Electronically balanced rotor
  • Heavy duty, one piece balanced steel pulleys
  • Two heavy duty reinforced notched belts (CX)
  • Manual belt tensioner
  • 3 Point linkage, cat. 1 & 2
  • Floating top link
  • Forward & reverse rotor rotation; clockwise is standard
  • Rotor supports with spherical roller bearings
  • Rubber safety shielding
  • Replaceable skids
  • TECHNICAL FEATURES
  • STANDARD FEATURES
  • OPTIONAL EQUIPMENT
  • VIDEOS
  • MANUALS
ModelHPWorking widthOverall widthWeight lbsShip lbsRotor rpmBlades tip speed (ft/min)# of BladesCutting height# Belts & type

Driveline 1 3/8"

H70-06030-70

60"

71"

869

1,045

2,080

8,464

64

3/4"-6"

2 CX

ASAE cat. 4

overrunning clutch

H70-07235-70

72"

85"

955

1,145

2,080

8,464

80

3/4"-6"

2 CX

ASAE cat. 4

overrunning clutch

H70-08840-70

88"

99"

1,078

1,298

2,080

8,464

96

3/4"-6"

2 CX

ASAE cat. 4

overrunning clutch

WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6″ overlap, do not use. Contact your dealer to purchase a longer driveline.

Reversible hitch for front and rear mounting

Reversible three point hitch for front and rear tractor mounting.

Gearbox by BEFCO

Gearboxes are manufactured by BEFCO and always assembled with top of the line gears, bearings and seals to ensure years of trouble free usage.

Cast iron rotor supports

Our cast iron rotor supports are designed and built in-house and assembled using spherical self-aligning bearings.

Belt shield fender

H70’s are equipped standard with belt shield fenders to protect the drive system from impacts with foreign objects.

Replaceable side skids

All units are delivered with replaceable side skids.

Clockwise rotor rotation

Clockwise rotor rotation allows cut debris to be thrown up and around the rotor and then straight down into the ground, reducing the risk caused by thrown objects.

Specific blades for any application

Only BEFCO offers you the choice of fine cut blades, dethatching blades, reverse “Y” blades, paddle blades or hammers blades allowing the operators to set up the unit specifically for their application.

ASAE Cat. 1 & 2 quick hitch compatible

Compatible with ASAE Cat. 1 and 2 quick hitches.

Dethatching blades (factory installed)

DBD60H70 rotor with dethatching blades for H70-060
DBD72H70 rotor with dethatching blades for H70-072
DBD88H70 rotor with dethatching blades for H70-088

Reverse “Y” blades (factory installed)

YBD60H70 rotor with reverse “Y” blades for H70-060
YBD72H70 rotor with reverse “Y” blades for H70-072
YBD88H70 rotor with reverse “Y” blades for H70-088

Triangular paddle blades (factory installed)

TBD60H70 rotor with triangular paddle blades for H70-060
TBD72H70 rotor with triangular paddle blades for H70-072
TBD88H70 rotor with triangular paddle blades for H70-088

Hammer blades (factory installed)

HBD60H70 rotor with hammer blades for H70-060
HBD72H70 rotor with hammer blades for H70-072
HBD88H70 rotor with hammer blades for H70-088

Gauge wheels

0099691 Gauge wheels with laminated tires for H70

Front mount (factory installed)

FRTXXH70 Front mount

Reverse rotation (factory installed)

RVRXXH70 Reverse rotor rotation (counter clock-wise)

Metal dust skirt

DST88H70 Metal dust skirt for H70-088

Operator’s & Parts manual – Serial # 279836+

Operator’s & Parts manual – Serial # 251882 to 279835

Operator’s & Parts manual – Serial # 251881-