BPL SD

Soil pulverizers
25-50 HP (19-37 KW)
Cat. 1

  • 3/8″ steel spikes fully welded in a timed scroll pattern on a heavy walled roller with two 160 lbs. compression springs
  • 10″ (49.1 lb/ft) frame beam
  • Reversible heat treated 1/2″ x 2″ shanks
  • 3 point linkage, cat. 1
  • 5 9/16″ diameter spiked roller tube
  • Self aligning 1″ bearings on roller
  • Formed plate “A” frame
  • TECHNICAL FEATURES
  • STANDARD FEATURES
  • OPTIONAL EQUIPMENT
  • MANUALS
ModelHPHitchWorking width

Overall width

Weight lbs

Ship

lbs

# of shanks

# of roller spikes

Shank spacing

Shank penetration

Spring pressure lbs

BPL-048

25-50

Cat. 1

48"

52"

496

544

17

70

2 13/16"

4 1/2"

160 ea.

BPL-060

25-50

Cat. 1

60"

64"

652

702

21

88

2 13/16"

4 1/2"

160 ea.

BPL-072

25-50

Cat. 1

72"

76"

679

729

25

106

2 13/16"

4 1/2"

160 ea.

Heavy duty formed plate “A” frame

Our fully welded and formed heavy duty “A” frames resist the toughest working conditions.

Massive 10″ I beam frame construction

Even our Standard duty soil pulverizers are heavier built then most of the competitors Heavy duty units. Standard duty pulverizers utilize a 10″ (49.1 lbs/ft) frame I beam  as the main frame structure.

Reversible shanks

Heat treated 1/2″x2″ shanks are heavier duty than the spikes often used by the competition and are reversible giving you twice the use out of them.

Heat treated spikes

3/8″ steel spikes fully welded in a timed scroll pattern on a heavy walled roller.

Self aligning roller bearings

Greasable self angling 1″ roller bearings allow the rear roller to spin freely over the ground.

ASAE Cat. 1 quick hitch compatible

Compatible with ASAE Cat. 1 quick hitches.

Second spiked roller

0099887 Second spiked roller assembly (Ø 5″) with up to 62 lbs of pressure for BPL-048
0099636 Second spiked roller assembly (Ø 5″) with up to 102 lbs of pressure for BPL-060
0099637 Second spiked roller assembly (Ø 5″) with up to 114 lbs of pressure for BPL-072

Operator’s & Parts manual