Grooming mowers
20-50 HP (15-37 KW)
540 rpm - Cat. 1
- Highly engineered & rugged gearbox with cooling fins
- Spiral gears guarantee strength and quietness
- Cutting heights: from 1″ to 5″
- Front & rear tractor mounting
- 4 rubber swivel tires with bearings to guarantee a perfectly level cut
- Stamped steel reinforced wheel arm attached by 8 bolts for maintaining a consistent cutting height
- Floating 3 point linkage, cat. 1
- 8 gauge reinforced mower deck
- Spindle shafts greased from the top for easy service
- Safety chain shield standard
- Two heavy duty reinforced belts (SPBX)
- Heavy duty, one piece, balanced steel pulleys
- Heavy duty shielded PTO shaft (1 3/8″ ASAE cat. 3)
- Stamped steel wheel yokes
- TECHNICAL FEATURES
- STANDARD FEATURES
- OPTIONAL EQUIPMENT
- VIDEOS
- MANUALS
MODELS WITH SOLID TIRES (SIZE 10"x3.2")
Model | HP | Working width | Overall width | Weight lbs | Ship lbs | Rotor rpm | Blade tip speed (ft/min) | # of blades | Cutting height | # Belts & type | Driveline 1 3/8" |
---|---|---|---|---|---|---|---|---|---|---|---|
C50-RD5H | 20-50 | 60" | 62" | 550 | 665 | 3,210 | 16,929 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
C50-RD6H | 25-50 | 72" | 74" | 600 | 730 | 2,605 | 16,732 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
C50-RD7H | 30-50 | 84" | 86" | 690 | 835 | 2,195 | 16,338 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
MODELS WITH PNEUMATIC TIRES (SIZE 11"x4")
Model | HP | Working width | Overall width | Weight lbs | Ship lbs | Rotor rpm | Blade tip speed (ft/min) | # of blades | Cutting height | # Belts & type | Driveline 1 3/8" |
---|---|---|---|---|---|---|---|---|---|---|---|
C50-RD5A | 20-50 | 60" | 62" | 534 | 649 | 3,210 | 16,929 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
C50-RD6A | 25-50 | 72" | 74" | 584 | 714 | 2,605 | 16,732 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
C50-RD7A | 30-50 | 84" | 86" | 674 | 819 | 2,195 | 16,338 | 3 | 1-5 | 2 SPBX | ASAE cat. 3 |
WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6″ overlap, do not use. Contact your dealer to purchase a longer driveline.
Manual belt tensioning
Manual belt tensioner maintains constant tension on belts without stretching them like a typical spring loaded idler would. This means that belts last much longer and there is no spring loaded idler that needs to be disassembled at the end of the mowing season to prevent it from stretching the belts during the winter months.
Pins that stay in place
Mowers that use traditional cotter pins often lose them when the mower gets too close to a bush. This not only causes the loss of the pin but may also cause the loss of the height adjustment spacers and in some cases even the wheel yokes.
For this reason, BEFCO designed and manufactured a pin that will stay securely fastened under almost any circumstances.