SEED-RITE

Primary seeders
25-70 HP (19-52 KW)
Cat. 1

  • 3 Point linkage, cat. 1
  • 74″ seeding width.
  • Heavy duty frame
  • Heavy duty lid with seed splash guard
  • Ground drive system for seed hopper
  • Hopper capacity 7.00 cu. ft.
  • Seed box with steel shaft agitator
  • 10 high precision metering seed cups
  • Two lift hooks
  • Wide range of calibration settings per acre
  • Wind guarded seed drop
  • ANSI #50 chains with chain tensioners
  • Rear corrugated roller with 29 – 9 1/2″ diameter rings made with low weight with nylon/fiberglass
  • Roller spindles: 1 3/8″ front and rear, with greasable bearings
  • Two spring-tine track removers
  • TECHNICAL FEATURES
  • STANDARD FEATURES
  • OPTIONAL EQUIPMENT
  • MANUALS
ModelHPHitchWorking widthOverall widthWeight lbsShip lbs

Chain type

# Seed cups

Capacity cu. ft.

SRT-074

25-70

Cat. 1

74"

80"

1,008

1,190

ANSI #50

10

7

WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6″ overlap, do not use. Contact your dealer to purchase a longer driveline.

Chain driven seed hopper

Seed-Rite seed hoppers are driven from the bottom roller. Seed is dropped only when the roller begins turning.

Precise seed calibration

Seed calibration handle allows operator to precisely select the amount of seed to spread.

Seed metering cups

BEFCO’s seed metering cups allow for an always accurate and even distribution of a wide variety of seeds.

Corrugated rollers

All seeders are equipped with nylon / fiberglass corrugated roller rings to compact the ground for optimal seed germination.

Spring-tine tractor tire track remover

Spring-tine tractor tire track removers help break up the ground the tractor tire stepped on and allow for the seed to incorporate into the ground.

Lift hooks

Lift hooks allow for quick and easy loading and unloading of seeder to and from your jobsite.

ASAE Cat. 1 quick hitch compatible

Compatible with ASAE Cat. 1 quick hitches.

Cast iron roller rings (factory installed)

CSR74SRT Cast iron roller rings for SRT-074

Seed rate speed reduction kit

0099985 Seed rate speed reduction kit

Seed conveyor kit

0099138 Seed conveyors for SRT-074

Rear expanded roller with tickler tines

0099930 Rear expanded roller frame for seed covering / dethatching with adjustable tickler tines

Operator’s & Parts manual