HURRICANE H70
Flail mowers
30-70 HP (22-52 KW)
540 rpm - Cat. 1 & 2
- Cutting heights: from 3/4″ to 6″
- Choice of fine cut blades at 90° angles, reverse “Y” blades, paddle blades or hammer type blades
- Dethatching blades available
- Adjustable cutting height roller with scraper
- Driveline with overrunning clutch (1 3/8″ ASAE cat. 4)
- Highly engineered & rugged gearbox
- Belt shield fender
- Front & rear tractor mounting
- Electronically balanced rotor
- Heavy duty, one piece balanced steel pulleys
- Two heavy duty reinforced notched belts (CX)
- Manual belt tensioner
- 3 Point linkage, cat. 1 & 2
- Floating top link
- Forward & reverse rotor rotation; clockwise is standard
- Rotor supports with spherical roller bearings
- Rubber safety shielding
- Replaceable skids
| Model | HP | Working width | Overall width | Weight lbs | Ship lbs | Rotor rpm | Blades tip speed (ft/min) | # of Blades | Cutting height | # Belts & type | Driveline 1 3/8" |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H70-060 | 30-70 | 60" | 71" | 869 | 1,045 | 2,080 | 8,464 | 64 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
| H70-072 | 35-70 | 72" | 85" | 955 | 1,145 | 2,080 | 8,464 | 80 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
| H70-088 | 40-70 | 88" | 99" | 1,078 | 1,298 | 2,080 | 8,464 | 96 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6″ overlap, do not use. Contact your dealer to purchase a longer driveline.
Reversible hitch for front and rear mounting
Reversible three point hitch for front and rear tractor mounting.
Gearbox by BEFCO
Gearboxes are manufactured by BEFCO and always assembled with top of the line gears, bearings and seals to ensure years of trouble free usage.
Cast iron rotor supports
Our cast iron rotor supports are designed and built in-house and assembled using spherical self-aligning bearings.
Belt shield fender
H70’s are equipped standard with belt shield fenders to protect the drive system from impacts with foreign objects.
Replaceable side skids
All units are delivered with replaceable side skids.
Clockwise rotor rotation
Clockwise rotor rotation allows cut debris to be thrown up and around the rotor and then straight down into the ground, reducing the risk caused by thrown objects.
Specific blades for any application
Only BEFCO offers you the choice of fine cut blades, dethatching blades, reverse “Y” blades, paddle blades or hammers blades allowing the operators to set up the unit specifically for their application.
ASAE Cat. 1 & 2 quick hitch compatible
Compatible with ASAE Cat. 1 and 2 quick hitches.
Dethatching blades (factory installed)
DBD60H70 rotor with dethatching blades for H70-060
DBD72H70 rotor with dethatching blades for H70-072
DBD88H70 rotor with dethatching blades for H70-088
Reverse “Y” blades (factory installed)
YBD60H70 rotor with reverse “Y” blades for H70-060
YBD72H70 rotor with reverse “Y” blades for H70-072
YBD88H70 rotor with reverse “Y” blades for H70-088
Triangular paddle blades (factory installed)
TBD60H70 rotor with triangular paddle blades for H70-060
TBD72H70 rotor with triangular paddle blades for H70-072
TBD88H70 rotor with triangular paddle blades for H70-088
Hammer blades (factory installed)
HBD60H70 rotor with hammer blades for H70-060
HBD72H70 rotor with hammer blades for H70-072
HBD88H70 rotor with hammer blades for H70-088
Gauge wheels
0099691 Gauge wheels with laminated tires for H70
Front mount (factory installed)
FRTXXH70 Front mount
Reverse rotation (factory installed)
RVRXXH70 Reverse rotor rotation (counter clock-wise)
Metal dust skirt
DST88H70 Metal dust skirt for H70-088
Operator’s & Parts manual – Serial # 279836+
Operator’s & Parts manual – Serial # 251882 to 279835
Operator’s & Parts manual – Serial # 251881-
